Login or Register to make a submission.

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
  • JAMI only publishes papers written in Bahasa Indonesia as well as in English.
    JAMI hanya menerbitkan makalah yang ditulis dalam Bahasa Indonesia dan lebih baik dalam Bahasa Inggris.
  • Please make sure that authors understand and follow these terms before proceeding with the next step in article submission.
    The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor). Articles published in conferences will need to be altered prior to submission with at least 35% differences to the original paper, and pass our similarity check.
    Authors are bound to our Plagiarism Policy, thus careful considerations should be done prior to submitting the article. In any circumstances that JAMI found article has or being published elsewhere which is identical to the one published in JAMI, we will retract the article following COPE's guidelines on retracting articles and notify the author.
    Harap pastikan bahwa penulis memahami dan mengikuti persyaratan ini sebelum melanjutkan dengan langkah selanjutnya dalam pengiriman artikel.
    Kiriman belum pernah dipublikasikan , atau belum ada sebelum jurnal lain untuk dipertimbangkan (atau penjelasan telah diberikan dalam Komentar untuk Editor). Artikel yang diterbitkan dalam konferensi perlu diubah sebelum diserahkan dengan setidaknya 35% perbedaan dengan makalah aslinya, dan lulus pemeriksaan kesamaan kami.
    Penulis terikat dengan Kebijakan Plagiarisme kami, oleh karena itu pertimbangan yang cermat harus dilakukan sebelum mengirimkan artikel. Dalam keadaan apa pun yang JAMI temukan artikel telah atau diterbitkan di tempat lain yang identik dengan yang diterbitkan di JAMI, kami akan menarik kembali artikel mengikuti pedoman COPE tentang mencabut artikel dan memberi tahu penulis.
  • The submission file is in Document file format (.doc, .docx, .rtf, or .odt), following the author guidelines and article template. Please make sure that you use Mendeley to help in referencing. A guide to using Mendeley as a reference manager is provided.
    Failure to follow the guidelines will cost you time and perhaps the rejection of your manuscripts.
    File pengiriman dalam format file dokumen (.doc, docx, .rtf, atau .odt) , mengikuti pedoman penulis dan template artikel. Pastikan Anda menggunakan Mendeley untuk membantu dalam referensi. Panduan untuk menggunakan Mendeley sebagai manajer referensi disediakan.
    Kesalahan dalam mengikuti pedoman dapat berakibat penolakan dari naskah Anda.
  • Where available, URLs or DOIs for the references must be provided, and try to use the most up-to-date references. Do pay attention that JAMI prefers journal articles as references.
    Bilamana tersedia dalam pengutipan, URL atau DOI untuk referensi harus disediakan, dan cobalah untuk menggunakan referensi yang paling mutakhir. Perhatikan bahwa JAMI lebih memilih artikel jurnal sebagai referensi.
  • Authors are discouraged from withdrawing submitted manuscripts after it is in the publication process (review, copyedit, layout, etc.,). During the time, JAMI had spent valuable resources besides time spent in the process.
    Penulis tidak disarankan menarik naskah yang dikirim setelah itu dalam proses publikasi (tinjau, salin, tata letak, dll). Selama ini, JAMI telah menghabiskan sumber daya berharga selain waktu yang dihabiskan dalam proses.
  • Since JAMI is a peer-reviewed journal, the instructions in Ensuring a Blind Reviewed article needs to be followed.
    Karena JAMI adalah jurnal yang ditinjau oleh rekan sejawat , instruksi dalam Memastikan artikel Blind review oleh reviewer perlu diikuti.
  • Enter your Whatsapp number in the comments field to make it easier for the editor to contact you if your email has a problem
    Masukkan nomor Whatsapp Anda di bidang komentar untuk memudahkan editor menghubungi Anda jika email Anda memiliki masalah

Author Guidelines

Before prepare and submit article manuscripts, please note that author(s) are discouraged from withdrawing submitted papers after it is in the publication process (review, copyedit, layout, etc.). During the time, JAMI had spent valuable resources besides time spent in the process.

Please prepare your manuscript before submission, using the following guidelines and the article template below:


Article files should be provided in Document format (doc, docx, rtf, and odt) . We currently do not accept other formats, such as LaTex or PDF files.

Article Length

Articles should be between 5-10 pages and minimum of 3000 words , including references. A maximum of 4 pages long appendices are allowed. If not in accordance with the provisions of the length of the article will be revised or rejected

Article Title

A title of 15 (fifteen) words maximum should be provided.

Author Details and Authorship

All contributing authors’ names should be added, and their names arranged in the correct order for publication. A correct email address should be supplied only by the corresponding author. The full name of each author must be present in the exact format they should appear for publication, including or exclude any middle names or initials as required. The affiliation of each contributing author should be correct on their individual author name.

The criteria of authorship are as follows; Substantial contributions to the conception or design of the work; or the acquisition, analysis, or interpretation of data for the work; drafting the work or revising it critically for important intellectual content; final approval of the version to be published; Agreement to be accountable for all aspects of the work in ensuring that questions related to the accuracy or integrity of any part of the work are appropriately investigated and resolved.

Structured Abstract

Authors must supply a structured abstract in their submission, which includes:


A maximum of 250 words in total excluding keywords. It has to be in English regardless of the article's content's languages.


The authors should provide appropriate and short keywords that encapsulate the principal topics of the paper. The maximum number of keywords is 5 (five) words.

Article Organization

The body of articles should be organized (at least) into the IMRaD structure as follow;

Introduction Section provides adequate background or context (problem and its significance) of the study. The subject should not be written extensively. It is expected that the rationale or purpose of the study (gap analysis), the objective in general and specific, and hypothesis (if any) should be expressed clearly. Present a clear "state of the art" of the subject, which discussed literature and theoretical concepts behind it. A concise general background may be included in the article. Present at least 5 (five) recent related works to support the novelty of the research.
Methods Section provides sufficient details to allow the work to be reproduced by an independent researcher. Methods that are already published should be summarized and indicated by a reference. If quoting directly from a previously published method, use quotation marks and also cite the source. Any modifications to existing methods should also be described. Indicate the participants observed, including demographic data, number of respondents, the rationale of respondents selection, etc. Describe the design of the experiment, such as the experiment procedures, surveys, interviews, observation characteristics, etc. Write the complete research procedure. Be sure that explanations made in the article will allow other researchers to reproduce the work, or make future work out of it.
Results and discussions. Write results in a logical sequence. Results with important findings should be present first. When presenting results in a table or figure, do not repeat all those contents in the text. Present only the summary of the text. Describe only new and important aspects of the study. Do not repeat all information from the results section or any section above. Present limitations of the study. Write the issues that are new or unsolved, for future research. This section consists of the information on What/How the presented data were produced, no raw data should be present in the article. The produced data are presented in tables, or figures with an explanation of what is the result/findings from the work. The section will also need to address connections between findings and basic concepts or hypotheses made earlier. Authors should also express whether any arguments were needed relating to other works from other researchers. Write implications made by the work related to theoretical or applications.
Conclusions Section. The conclusion should be linked to the title and objectives of the study. Do not make statements not adequately supported by your findings. Write the improvements made to the industrial engineering field or science in general. Do not make further discussions, repeat the abstract, nor only list the results of research results. Do not use bulleted points, use paragraphed sentences instead.

Biographies and Acknowledgments

Those who contribute but do not meet all criteria for authorship should not be listed as authors, but they should be acknowledged at the end of the text. Only the names of the persons but not their role should be written under the acknowledgment section. Authors must declare all sources of external research funding in their article and a statement to this effect should appear in the Acknowledgements section.

Authors who wish to include these items should save them together in the MS Word file to be uploaded with the submission. If they are to be included, a brief professional biography of 100 words maximum should be supplied for each named author.

Article Categories

Authors must categorize their paper as part of the article information. The category which most closely describes their paper should be selected from the list below.

Research paper. This category covers papers that report on any type of research undertaken by the authors. The research may involve the construction or testing of a model or framework, action research, testing of data, market research or surveys, empirical, scientific, or laboratory research. 
Technical paper. Describes and evaluates technical products, processes, or services. 
Conceptual paper. These papers will not be based on research but will develop hypotheses. The papers are likely to be discursive and will cover philosophical discussions and comparative studies of others' work and thinking. 
Case study reports. Case studies describe actual interventions or experiences within organizations. They may well be subjective and will not generally report on research. A description of a legal case or a hypothetical case study used as a teaching exercise would also fit into this category. 


Headings must be concise, with a clear indication of the distinction between the hierarchy of headings. The format is provided in the article's template.


Notes or Endnotes should be used only if absolutely necessary and must be identified in the text by consecutive numbers, enclosed in square brackets and listed at the end of the article.


All Figures (charts, diagrams, line drawings, web pages/screenshots, and photographic images) should be submitted in electronic form. All Figures should be of high quality, legible, and numbered consecutively with Arabic numerals. Graphics may be supplied in color to facilitate their appearance on the online database. Figures created in MS Word, MS PowerPoint, MS Excel should be supplied in their native formats. Electronic figures created in other applications should be copied from the origination software and pasted into MS Word template document. Photographic images should be inserted in the main body of the article and of high quality.


Tables should be typed and included in the main body of the article. The position of tables should be inserted in the text as close to the point of reference as possible. Ensure that any superscripts or asterisks are shown next to the relevant items and have corresponding explanations displayed as footnotes to the table, figure, or plate.


JAMI prefers articles which refer mainly to journal articles, research reports, and conference proceedings, rather than rely heavily on textbooks or handbooks to demonstrate articles' novelty in the subject discussed. The use of Mendeley as a tool in referencing is preferable and encouraged. References should be carefully checked for completeness, accuracy, and consistency.

Author(s) should cite publications in the text following the APA citation style. At the end of the paper, a reference list in alphabetical order should be supplied as follows:

Brewer, M. B., & Pierce, K. P. (2005). Social identity complexity and outgroup tolerance. Personality and Social Psychology Bulletin31(3), 428-437..

Hyde, J., Hankins, M., Deale. A., & Marteau, T. M. (2008). Interventions to increase self-efficacy in the context of addiction behaviours: A systematic literature review. Journal of Health Psychology, 13, (5), 607-623.

Nalendra, A. K., Winarno, W. W., & Sunyoto, A. (2017). Pemodelan Arsitektur Enterprise dengan TOGAF pada SMK Bhakti Mulia Pare. Jurnal Ekonomi dan Teknik Informatika4(1), 1-11.

Saifuddin, A. (2007). Metode Penelitian Kuantitatif.

Wigglesworth, G., & Storch, N. (2009). Pair versus individual writing: Effects on fluency, complexity and accuracy. Language Testing26(3), 445-466.

Willig, C. (2013). Introducing qualitative research in psychology. McGraw-hill education (UK).

Desiningrum, D. R. (2011). Socioemotional selectivity (future time perspective, goal orientation) and subjective well being. In The Padjadjaran International Conference on Psychology 2011 (pp. 1-14).

Pratama, A. G. (2009). Kontribusi kesejahteraan subjektif pada religiusitas Islam, persepsi tentang penyakit, dan perilaku menjaga kesehatan diri dalam model perilaku memelihara kesehatan: Suatu upaya menemukan model perilaku memelihara kesehatan dengan taraf kecocokan optimal pada penderita HIV+. Disertasi. Program Pascasarjana Universitas Padjadjaran Bandung.

Albarracin, Johnson, & Zanna. (2005). The handbook of attitudes. New Jersey: Erlbaum.
American Psychological Association. (2010). Publication manual of the American Psychological Association. Sixth edition. Washington D.C.: American Psychological Association

Link Template

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.